top of page
Cantilever
1
Description
SHELVING UNITS FOR STORING LARGE GOODS
The complete bolting allows painting the columns also inside for better protection and durability. The special conical bolt class 8.8 are used for greater safety, ease of installation or disassembly. It can be
modified over time depending on different logistical requirements of your warehouse.
Shelving ideal for the storage of goods characterized by volumes and dimensions which can make it difficult to place them, such as bundles of pipes or boards, profiles, but also suitable pallets and metal
containers. Arms and columns are realized in different sizes and dimensions, so as to easily meet the needs of the cantilever shelf space and inventory management.
2
Patented arm lock for superior performance
The Sequoia arm lock, covered by an exclusive patent, it is made through molding instead of by extrusion: this allowed to model its shape obtaining higher performance due to the groove created in its
area of contact with the structure. This allows a greater stability of the structure.
3
Advantages
If you need to store heavy and bulky loads, improve your storage using cantilever.
3.1
STURDINESS
The cross bracings have a diameter of 42 mm, against the smaller pipes or other types of open profiles used by competitors.
Base and column are held together by bolts. The firm hold of their fixtures is critical to the safety of the entire system.
The base of the cantilever is the element on which you unload the vertical forces of the entire system. It is therefore an essential element for safety.
3.2
SAFETY
The arm lock of the traditional cantilever systems, does not have elements that can surely avoid the slipping in case of stress. It can come into contact with moving parts.
The columns and all the other elements of the system are held together by special cross vaults, which play a major role in the stability of the entire structure.
The front plate of the base was welded using a system that avoids the formation of protruding elements which can create problems when handling goods on them
3.3
COMPETITIVENESS
On each arm there are three holes, as standard, where an anti-fall pin can be inserted, that may be necessary for greater safety in the storage of certain materials and products.
SEQUOIA uprights are made with six types of profiles
3.4
INNOVATION
The Cantilever arm lock is made with a production system which is covered by the exclusive patent, by molding rather than by extrusion. This allows to model its shape, achieving new and higher
performances: the groove created in the contact zone with the structure allows greater stability.
Conical self-lock bolts are oversized (threaded part of 16 mm and 17 mm body, against smaller traditional sizes).
4
Accessories
From the anti-fall pin to contrast runners choose the right accessory for your cantilever.
-
Grid Shelves
-
Contrast rails
-
Corrugated sheet cover
-
Space breaker arm
-
Base space breaker
-
Anti-fall pin
5
COLOURS
Colors for Sequoia cantilever:
The metal pallet rack comes in the following colors:
STANDARD
Galvanized / Grey Ral 7026 / Magenta Ral 4003
Available on request
Galvanized / Blue RAL 5010
Galvanized /White RAL 9010
Galvanized / Metallic Aluminum RAL 9006
Galvanized / Yellow RAL 1021
Galvanized / Grey RAL 7038
Galvanized / grey RAL 7026
Galvanized / Orange RAL 2004
SPECIAL COLOURS (WITH A MINIMUM ORDER)
Galvanized / RAL Color
6
Certified quality for our anti-seismic lightweight shelving
Bracing systems
The steel used for the realization of the braces is of 3.1 certificate structural type, S 235JRH, with minimum unit yield stress of 235 N / mm2 and minimum elongation at rupture of 24% . The product is obtained from tubular bars, by means of welding and subsequent painting.
Arm lock
The steel used for the realization of the arm locks is 3.1 certificate structural type, S355JR with minimum unit yield stress of 355 N / mm2. The product is obtained by molding and hot-dip galvanizing.
Arm connector
The steel used for the realization is 3.1 certificate structural type., S 235JRH, with minimum unit yield stress of 235 N / mm2 and minimum elongation at rupture of 24% . The product is obtained from tubular bars, by means of welding and subsequent painting.
Arm
The steel used for the realization of the arms is 3.1 certificate structural type, S235JR with minimum unit yield strength of 235 N / mm2. The product is obtained from pickled coils, by folding and subsequent painting.
Base
The steel used for the realization of the bases is 3.1 certificate structural type, S235JR with minimum unit yield stress of 235 N / mm2. The product is obtained from pickled coils, by folding and subsequent painting.
Column
The steel used for the realization of the columns is 3.1 certificate structural type, S 235JR with the addition of Niobium, with minimum unit yield stress of 235 N / mm2. The product is obtained from pickled coils, by folding and subsequent painting.
bottom of page